Author: mlevel
Subject: Проблема в работе Asterisk + Huawei E171
Posted: Sat Jan 14, 2012 19:45 (GMT 1)
Конфигурирую систему для приема звонков.
FreeBSD 8.2-STABLE
Asterisk – 1.8.8.1
Модем Huawei E171
Столкнулся с ошибкой:
| Code: |
| ERROR[53466]: at_response.c:364 at_response_error: [dongle0] Getting IMSI number failed |
Подскажите пожалуйста, в чем может быть проблема?
Заранее спасибо.
# usbconfig
| Code: |
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
ugen4.2: <HUAWEI Mobile HUAWEI Technology> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON |
/usr/local/etc/dongle.conf
| Code: |
[general]
interval=15
[defaults]
context=default
group=0
rxgain=0
txgain=0
autodeletesms=yes
resetdongle=yes
u2diag=-1
usecallingpres=yes
callingpres=allowed_passed_screen
disablesms=no
language=en
smsaspdu=yes
mindtmfgap=45
mindtmfduration=80
mindtmfinterval=200
callwaiting=auto
disable=no
initstate=start
dtmf=relax
[dongle0]
context=office
audio=/dev/cuaU0.2 ; tty port for audio connection
data=/dev/cuaU0.3 ; tty port for AT commands
group=1
rxgain=3
txgain=3
autodeletesms=yes
resetdongle=yes
usecallingpres=yes
callingpres=allowed_passed_screen
|
# ls /dev | grep cuaU
| Code: |
cuaU0.0
cuaU0.0.init
cuaU0.0.lock
cuaU0.1
cuaU0.1.init
cuaU0.1.lock
cuaU0.2
cuaU0.2.init
cuaU0.2.lock
cuaU0.3
cuaU0.3.init
cuaU0.3.lock |
# ls /dev | grep ttyU
| Code: |
ttyU0.0
ttyU0.0.init
ttyU0.0.lock
ttyU0.1
ttyU0.1.init
ttyU0.1.lock
ttyU0.2
ttyU0.2.init
ttyU0.2.lock
ttyU0.3
ttyU0.3.init
ttyU0.3.lock |
/var/log/asterisk/message
| Code: |
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] AT sent successfully
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] ATZ sent successfully
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] ATE sent successfully
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] Got AT_CGMI data (manufacturer info)
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] AT+CGMI sent successfully
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] Got AT_CGMM data (model info)
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] AT+CGMM sent successfully
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] Got AT+CGMR data (firmware info)
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] AT+CGMR sent successfully
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] AT+CMEE sent successfully
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] Got AT+CGSN data (IMEI number)
[Jan 14 20:32:05] DEBUG[53466] at_response.c: [dongle0] AT+CGSN sent successfully
[Jan 14 20:32:05] ERROR[53466] at_response.c: [dongle0] Getting IMSI number failed |
# dmesg -a
| Code: |
u3g0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00, addr 2> on usbus4
u3g0: Found 4 ports. |
crm*CLI> dongle show device state dongle0
| Code: |
————– Status ————-
Device : dongle0
State : Not connected Start scheduled
Audio : /dev/cuaU0.2
Data : /dev/cuaU0.3
Voice : No
SMS : No
Manufacturer :
Model :
Firmware :
IMEI :
IMSI :
GSM Registration Status : Unknown
RSSI : 0, <= -125 dBm
Mode : No Service
Submode : No service
Provider Name : NONE
Location area code :
Cell ID :
Subscriber Number : Unknown
SMS Service Center :
Use UCS-2 encoding : No
USSD use 7 bit encoding : No
USSD use UCS-2 decoding : Yes
Tasks in queue : 0
Commands in queue : 0
Call Waiting : Disabled
Current device state : stop
Desired device state : start
When change state : now
Calls/Channels : 0
Active : 0
Held : 0
Dialing : 0
Alerting : 0
Incoming : 0
Waiting : 0
Releasing : 0
Initializing : 0 |
crm*CLI> dongle show devices
| Code: |
ID Group State RSSI Mode Submode Provider Name Model Firmware IMEI IMSI Number
dongle0 1 Not connec 0 0 0 NONE Unknown
|
crm*CLI> dongle show version
| Code: |
chan_dongle: Huawei 3G Dongle Channel Driver, Version 1.1, Revision 13
Project Home: http://code.google.com/p/asterisk-chan-dongle
Bug Reporting: http://code.google.com/p/asterisk-chan-dongle/issues/list
|
Перейти к источнику
